Shandong Shengyue Technology Development Co.,Ltd is one of the most professional sinotruk howo heavy-duty truck specific bmd-6206 4-core motor encoder 45mm manufacturers and suppliers in China. Please feel free to buy high quality genuine auto parts at competitive price from our factory.
SINOTRUK HOWO heavy-duty truck specific Bmd-6206 4-core motor encoder 45mm
Working Principle
1. Speed Sensing: It uses an internal optical disc and photoelectric sensor to divide the motor shaft's rotation into individual pulse signals. This signal is transmitted to the shift assist controller (ECU) to determine the motor speed.
2. Direction Determination: Due to its 4-wire design, it can determine whether the motor is rotating forward or backward (determined by the phase difference). This is crucial for the shift assist system to know whether it's an "upshift" or a "downshift."
3. Shift Timing Determination: In the shift assist system, shifting is only allowed when the motor is rotating; if the vehicle is switched off or the motor stops rotating, the encoder signal disappears, and the system will prevent shifting, preventing "gear clash" or "neutral coasting."
DETAILS
| DESCRIPTION | 4-core motor encoder | PART NUMBER | Bmd-6206 |
| WEIGHT | 0.5KG | VOLUME |
Outer Diameter 45mm Thickness 10mm Wire Gauge 0.8mm Cable Length 500mm |
| MOQ | 1 | WARRANTY | 1 year |
| PAYMENT | TT/WESTEN UNION | SHIPMENT | by air/sea/railway |
| BRAND | SINOSACHS | COUNTRY OF ORIGIN | CHINA |
| STOCK | IN STOCK | APPLICABLE SITE | gearbox |
Structural features
1. Optical disc (grating disc): The encoder contains a transparent glass fiber board (PCB) with fine grating lines (grating strips) on it.
2. Photoelectric sensor: Located close to one side of the optical disc, it reads the changes in light and dark of the grating lines, thereby generating pulse signals.
Installation
It must be installed perpendicular to the motor shaft, and the direction of the photoelectric disc must be aligned with the motor's direction of rotation. During installation, the phases of the "A" and "B" signals must be aligned to ensure accurate direction detection. It connects to the control box of the gearbox on the left side via four wires (power, ground, A-phase, and B-phase).
Failure Symptoms
When the encoder fails, it no longer outputs a signal. At this point, the gear shift assist system mistakenly assumes the motor is not rotating, leading to a complete failure of the gear shifting system.
If the motor is rotating but the gear shifting system is unresponsive, or if the motor speed signal is not displayed on the instrument panel (some models display this), it is highly likely that the encoder has failed. It should be replaced immediately in this case.
The optical disc inside the encoder is very precise; therefore, it is crucial to avoid getting fingerprints, oil stains, or dust on the optical disc during installation, as this will seriously affect signal reading.
When replacing the photoelectric encoder, ensure that the disc is correctly aligned with the motor's rotation direction (usually indicated by a mark or groove), and tighten the screws to prevent vibration from causing signal interference.

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------







Hot Tags: sinotruk howo heavy-duty truck specific bmd-6206 4-core motor encoder 45mm, manufacturers, suppliers, factory, parts, genuine, original, Sinotruk Double H Valve, HOWO Input shafts, HW19710 gearbox Shifting fork, HOWO Countershafts, SInoruk HOWO Transmission parts, HOWO Double H Valve













