ISUZU TRUCK 6HK1 Series Diesel Engines Fuel-Water Sediment Separator 1-13200960-0
Standard replacement interval
- It is recommended to replace the internal filter element every 250 to 500 operating hours.
- If the fuel quality at the work site is poor (often due to the use of private fuel delivery trucks or unclean storage tanks), it is recommended to shorten this interval and mandate replacement every 200 operating hours.
Daily Maintenance
1. Always drain the water separator before starting the equipment each day.
Every morning, before starting the equipment, unscrew the plastic drain valve at the bottom (counter-clockwise) to drain any accumulated water and reddish-brown oily sludge from the collection bowl. Once clean diesel fuel begins to flow out, tighten the valve immediately.
Ensure that the accumulated water never exceeds the warning line. If water overflows from the collection zone, it will enter the high-pressure fuel pump and fuel injectors, leading to extremely high repair costs.
2. Inspect the transparent collection bowl.
As part of your routine inspection, visually check the inside of the collection bowl.
If you observe an excessive amount of debris at the bottom, or the presence of blackish-gray, cotton-like oily residue, it indicates poor fuel quality; you will need to increase the frequency of cleaning or replacement.
1-13200960-0 Fuel Water Separator System BOM Detailed List
| No. | Component Name | ISUZU Genuine Part Number | Qty |
|---|---|---|---|
| 1 | Water Separator Assembly (Sedimenter/Fuel Filter Assy) |
1-13200960-0 (1132009600) |
1 Set |
| 2 | Fuel Primary Filter Element (Fuel Filter Element) |
1-13200960-0-EL (or equivalent genuine element No.) |
1 Pc |
| 3 | Filter Bracket Head (Filter Bracket/Head Base) |
1-13211XXX-X (Varies by equipment model) |
1 Pc |
| 4 | Priming Pump Component (Hand Primer Pump Assy) |
1-13242037-0 (Ref. No.) | 1 Pc |
| 5 | Air Bleeder Screw & Gasket (Air Vent Bolt Set) |
9-09572012-0 (Ref. No.) | 1 Set |
| 6 | Transparent Sediment Bowl (Water Collection Bowl) |
1-13213036-0 (Ref. No.) | 1 Pc |
| 7 | Bottom Drain Plug Valve (Water Drain Valve) |
1-13217014-0 (Ref. No.) | 1 Pc |
| 8 | Water-in-Fuel Level Sensor (Liquid Level Switch - Optional) |
1-82410XXX-X (Depending on spec) | 1 Pc |
| 9 | Inlet/Outlet Copper Washers (Fuel Line Banjo Gaskets) |
9-09921XXX-0 (Standard sizing) | 2-4 Pcs |
DETAILS
| DESCRIPTION | Fuel-Water Sediment Separator | PART NUMBER | 1-13200960-0 |
| WEIGHT | 3kg | VOLUME | 135 mm × 130 mm × 305 mm |
| TRUCK MOLDE | ISUZU | QUALITY | Copy,High Copy, OEM,Original |
| MOQ | 1 | WARRANTY | 1 year |
| PAYMENT | TT/WESTEN UNION | SHIPMENT | by air/sea/railway |
| BRAND | SINOSACHS | PLACE OF ORIGIN | JINAN CITY,CHINA |
| STOCK | IN STOCK | APPLICABLE SITE | ENGINE |
| PACKAGE | Carton/Woodenbox | PORT OF LANDING | Qingdao Port,China |
