FAST Transmission Main Shaft / Second Shaft JS150T-1701105
video
FAST Transmission Main Shaft / Second Shaft JS150T-1701105

FAST Transmission Main Shaft / Second Shaft JS150T-1701105

Compatible with Fast 9-speed twin-countershaft heavy-duty manual transmissions, such as the 9JS150T, 9JS150TA, and 9JS150TB.
Send Inquiry
Chat Now
Description

Shandong Shengyue Technology Development Co.,Ltd is one of the most professional fast transmission main shaft / second shaft js150t-1701105 manufacturers and suppliers in China. Please feel free to buy high quality genuine auto parts at competitive price from our factory.

 

FAST Transmission Main Shaft / Second Shaft JS150T-1701105

 

Core Function: It serves as the power output shaft of the main transmission. It is responsible for re-aggregating the torque-which has been distributed and gear-ratio-adjusted via the clutch, input shaft, and twin countershafts-and transmitting it directly rearward to the auxiliary transmission (range gear assembly) or the driveshaft.

 

Main Shaft Core Axis & Positioning Consumables (Mandatory Replacement)

No. Part Number Part Description (English) Qty Maintenance Advice & Replacement Reason
1 JS150T-1701105 Gearbox Main Shaft (Second Shaft) 1 Main item for replacement. Required due to wear, scoring, or excessive spline play.
2 JS150T-1701121B Main Shaft Hexagonal Key 1 The core sliding long key running through the shaft groove. Highly prone to shear deformation; mandatory replacement during overhaul.
3 JS150T-1701122 Hexagonal Key Locating Pin 1 A tiny pin used to secure the hex key. Easily lost or damaged during teardown; a new one must be prepared.
4 12JS160T-1701123 Gear Thrust Washer A/R Spacers between the 1st, 2nd, 3rd, 4th, and reverse gears. If scored, they cause axial gear movement; replacing the whole set is recommended.

 

Floating Gears & Synchronizer Components (Replace Based on Wear)

No. Part Number Part Description (English) Qty Maintenance Advice & Replacement Reason
5 JS150T-1701111B Main Shaft 1st Speed Gear 1 Critical for heavy-duty launch. Check internal engagement splines for rounded tips or pointed tooth wear.
6 JS150T-1701112B Main Shaft 2nd Speed Gear 1 Check gear teeth for pitting or spalling, and inspect if the clearance between the inner bore and the shaft journal exceeds limits.
7 JS150T-1701113B Main Shaft 3rd Speed Gear 1 Same as above. High-frequency usage gear in the mid-speed range.
8 JS150T-1701114B Main Shaft 4th Speed Gear 1 Same as above. Inspect the contact surface of the wear-resistant thrust plate on the gear face.
9 JS150T-1701109B Main Shaft Reverse Gear 1 High-risk area for gear clashing. Must be replaced if reversing is difficult or if the gear slips out.
10 JS130T-1701180 3rd/4th Synchronizer Assembly 1 Set Includes sleeve, hub, and rings. Replace as a whole unit if gear clashing or popping out occurs when shifting into 3rd/4th gear.
11 JS180-1701170 1st/2nd Synchronizer Assembly 1 Set Controls the low-speed range. The sleeve must be replaced if the internal splines have burrs, otherwise shifting will feel heavy.

 

Support Bearings & Gaskets (Mandatory Overhaul Consumables)

No. Part Number Part Description (English) Qty Maintenance Advice & Replacement Reason
12 Matches Input Shaft Input Shaft Rear Pocket Needle Bearing 1 Set Located inside the rear cavity of the input shaft to support the front of the main shaft. Usually disintegrates when the main shaft wears; must replace.
13 Matches 1701140 Main Shaft Rear Ball Bearing 1 Located on the main box rear wall to support the tail end. Check for pitted balls or excessive radial/axial play.
14 Standard Part Main-to-Auxiliary Box Housing Gasket 1 The old paper gasket must be scraped clean after separating the boxes. Replace with a new gasket and use red RTV silicone sealant.
15 Standard Part Top Control Cover Gasket 1 Replace after removing the top cover (shift control housing) to prevent oil weeping from the top of the transmission.

 

DETAILS

DESCRIPTION Transmission Main Shaft / Second Shaft PART NUMBER JS150T-1701105
WEIGHT 5kg VOLUME 45.0 cm × 12.0 cm × 12.0 cm
TRUCK MOLDE FAST QUALITY Copy,High Copy, OEM,Original
MOQ 1 WARRANTY 1 year
PAYMENT TT/WESTEN UNION SHIPMENT by air/sea/railway
BRAND SINOSACHS PLACE OF ORIGIN JINAN CITY,CHINA
STOCK IN STOCK APPLICABLE SITE GEARBOX
PACKAGE Carton/Woodenbox PORT OF LANDING Qingdao Port,China

 

H1e970938af4840e7acdb396ac462ba988          H2ff2e091f16847649a718ebf56151e7fP

H2a63fcdaa0d741e592fb59082fcbb41cb          Hb6bd1edff52441479f3a6ff727d6fc9d6

 

Company factory warehouse and shippingCompany factory warehouse and shipping

 

Company factory warehouse and shipping20260520112227288713

2026052013543528921320260520112214288613

Hot Tags: fast transmission main shaft / second shaft js150t-1701105, manufacturers, suppliers, factory, parts, genuine, original, HOWO Countershafts, HOWO Gearbox Gear shift cable, HOWO Operator assembly, HOWO ZF gearbox parts, HW10 gearbox parts, HW19710 gearbox Double H Valve

Send Inquiry
Categories

(0/10)

clearall