SINOTRUK SITRAK C7H HOWO T7H Steering Angle Sensor / Rotation Angle Sensor 441 120 0110 712W25441-6006
video
SINOTRUK SITRAK C7H HOWO T7H Steering Angle Sensor / Rotation Angle Sensor 441 120 0110 712W25441-6006

SINOTRUK SITRAK C7H HOWO T7H Steering Angle Sensor / Rotation Angle Sensor 441 120 0110 712W25441-6006

It is one of the core sensors for vehicle Electronic Stability Control (ESC/ESP) and Anti-lock Braking Systems (ABS/EBS), used to monitor the angle and speed of the vehicle's trajectory in real time.
Send Inquiry
Chat Now
Description

Shandong Shengyue Technology Development Co.,Ltd is one of the most professional sinotruk sitrak c7h howo t7h steering angle sensor / rotation angle sensor 441 120 0110 712w25441-6006 manufacturers and suppliers in China. Please feel free to buy high quality genuine auto parts at competitive price from our factory.

 

SINOTRUK SITRAK C7H HOWO T7H Steering Angle Sensor / Rotation Angle Sensor 441 120 0110 712W25441-6006

 

Product Features
1. High-precision Magneto-Resistive/Optical Technology: The sensor utilizes advanced non-contact electronic sensing technology (typically Magneto-Resistive) to simultaneously measure the steering wheel's absolute rotation angle, direction of rotation, and angular velocity.
2. Multi-turn Measurement Capability: Heavy-duty truck steering systems often require multiple steering wheel rotations; this sensor supports high-precision monitoring across a full range exceeding 720 degrees in either direction, maintaining accuracy even when the steering wheel is turned to the full lock position.

 

Common physical symptoms of sensor failure
1. Simultaneous dashboard warning lights: Warning lights for ABS (Anti-lock Braking System), EBS (Electronic Braking System), and ESC/ESP (Electronic Stability Control) often illuminate at the same time; this may even trigger speed or engine torque limitations.
2. Abnormal or heavy steering feel: When turning, the vehicle may exhibit abrupt steering behavior or abnormal self-centering torque; alternatively, the electronic control system might intervene erroneously, creating a sensation of brake drag.
3. Multifunction steering wheel button failure (specific case): If the sensor module is integrated with the steering wheel clock spring (or mounted on the same shaft), damage to the clock spring can simultaneously cause steering angle fault codes and the failure of buttons such as the horn and cruise control.

 

Replacement and Calibration (Important)
1. Installation with Steering Wheel Centered: Before replacing the sensor, the front wheels and steering wheel must be strictly positioned to point straight ahead (at the geometric zero point); improper removal or installation can damage the sensor's mechanical stops.
2. Software Matching and Dynamic Calibration: After replacing the sensor, the warning light typically will not turn off automatically. You must use an official Sinotruk diagnostic tool (such as the Intelligent Diagnostic System) or dedicated WABCO software to clear the steering absolute zero point and perform calibration (SAS Calibration), allowing the ECU to relearn the voltage value corresponding to straight-line driving.

 

Steering Angle Sensor Replacement Bill of Materials (BOM)

No. Part Number Part Name (EN) Qty Replacement Category Remarks / Functional Description
1 712W25441-6006
(or WABCO 441 120 0110)
Steering Angle Sensor 1 pc Mandatory Core component for this repair; provides real-time steering angle signals via CAN-Bus.
2 712W25441-6005
(Ref. No., verify via VIN)
Clock Spring / Slip Ring Assembly 1 pc Conditional
(Highly Recommended)
The sensor is buckled behind it. Replace together if the clock spring causes airbag or horn faults.
3 Q40316 / 99014320135
(SINOTRUK Standard)
Steering Wheel Lock Nut & Washer Kit 1 set Always Replace Critical safety hardware. Deforms upon removal; reuse is strictly prohibited to prevent loosening.
4 WG9719580015
(Ref. No.)
Steering Column Dust Boot / Seal Ring 1 pc Conditional Prevents moisture and dust from entering the cabin and contaminating sensor electrical pins.
5 199100580023
(SINOTRUK Clip)
Nylon Cable Ties / Wiring Harness Clips 4-6 pcs Always Replace Secures the CAN-Bus wiring harness to prevent tension or breakage during steering wheel rotation.
6 -- (General Chemical) Electronic Contact Cleaner / Grease 1 can Consumable Used to clean oxidation/dust on harness pins to eliminate loose-contact or intermittent faults.
7 -- (General Chemical) Threadlocker Glue (Medium Strength / Blue) As req. Consumable Applied to steering column small screws and the center lock nut to resist heavy-duty truck vibrations.

 

DETAILS

DESCRIPTION Steering Angle Sensor / Rotation Angle Sensor PART NUMBER 441 120 0110 712W25441-6006
WEIGHT 0.5kg VOLUME 85 mm × 72 mm × 25 mm
TRUCK MOLDE SINOTRUK QUALITY Copy,High Copy, OEM,Original
MOQ 1 WARRANTY 1 year
PAYMENT TT/WESTEN UNION SHIPMENT by air/sea/railway
BRAND SINOSACHS PLACE OF ORIGIN JINAN CITY,CHINA
STOCK IN STOCK APPLICABLE SITE CABIN
PACKAGE Carton/Woodenbox PORT OF LANDING Qingdao Port,China

 

20260814185027876417          20260814185030876517

20260814185038876617          20260814185041876717

 

 

Company factory warehouse and shippingCompany factory warehouse and shipping

 

Company factory warehouse and shipping20260520112227288713

2026052013543528921320260520112214288613

Hot Tags: sinotruk sitrak c7h howo t7h steering angle sensor / rotation angle sensor 441 120 0110 712w25441-6006, manufacturers, suppliers, factory, parts, genuine, original, HOWO Heater water tank, HOWO HW10 Cabin, HOWO radiator cover, howo Water Tank, Sinotruk Front cover, Sinotruk V Belts

Send Inquiry
Categories

(0/10)

clearall